Fastener Tightening Specifications

2004 Oldsmobile Bravada RWDSECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2003 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications

Application Specification
Metric English
Washer Solvent Container Bracket Screw 10 N.m 89 lb in
Washer Solvent Container Screws 10 N.m 89 lb in
Wiper Arm Nut 30 N.m 22 lb ft
Wiper Drive System Module Screws 10 N.m 89 lb in
Wiper Motor Cover Screws 2 N.m 18 lb in
Wiper Motor Crank Arm Screw 16 N.m 12 lb ft
Wiper Motor Screws 7 N.m 62 lb in
Wiper Transmission Screws 9 N.m 80 lb in
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.