Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Installation Procedure
2004 Oldsmobile Bravada RWDSECTION Installation Procedure
WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
In order to avoid personal Injury or vehicle damage when you repair or replace the carpet, use the same thickness and material size as the original Installation. Always return the carpet to the original location.
- Position the carpet to the intermediate body panel.
- Tuck the carpet under the adjoining panels and over the floor carpet.
- Install the stowage lid bracket.
- Install the stowage lid extension panel with the manual release cable extending out from under the extension panel. Refer to COMPARTMENT LID EXTENSION - FOLDING TOP STOWAGE .
- Close the stowage lid and check the operation of the latch.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.