Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA RWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1197 (POWER STEERING SYSTEM)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2004 Oldsmobile Bravada RWD
Fastener Tightening Specifications
2004 Oldsmobile Bravada RWDSECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Adjuster Plug Lock Nut | 68 N.m | 50 lb ft |
| Crossmember Mounting Nuts | 110 N.m | 81 lb ft |
| Cylinder Line End Fittings | 27 N.m | 20 lb ft |
| Cylinder Line Valve End Fittings | 17 N.m | 13 lb in |
| Inner Tie Rod | 100 N.m | 74 lb ft |
| Outer Tie Rod Jam Nut | 60 N.m | 44 lb ft |
| Outer Tie Rod End Stud Nut to Knuckle (First Pass) | 20 N.m | 15 lb ft |
| Outer Tie Rod End Stud Nut to Knuckle (Second Pass) | 160 degrees | |
| Outer Tie Rod End Stud Nut to Knuckle (Final Pass) | 45 N.m | 33 lb ft |
| Power Steering Hose Fittings | 27 N.m | 20 lb ft |
| Power Steering Gear Mounting Bolt Nuts to Crossmember | 100 N.m | 74 lb ft |
| Power Steering Pump Mounting Bolts | 25 N.m | 18 lb ft |
| Power Steering Reservoir Bracket Bolts to Engine | 50 N.m | 37 lb ft |
| Power Steering Return Hose Mounting Bolts | 11 N.m | 97 lb in |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.