Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA RWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 11 (SUPPLEMENTAL INFLATABLE RESTRAINT SYSTEM)TORQUE SPECIFICATIONS
2004 Oldsmobile Bravada RWD
Torque Specifications
2004 Oldsmobile Bravada RWDSECTION Torque Specifications
WARNING: This page is about a different car, the 2000 Buick Park Avenue. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Application | Ft-lbs N.m |
|---|---|
| Steering wheel nut | 30 (41) |
| Inch-lbs N.m | |
| Side impact air bag module nuts | 45 (5) |
| Heater & A/C control assembly screws | 16 (1.8) |
| Instrument panel trim pad screws | 18 (2) |
| Lower steering column cover screws | 31 (3.5) |
| Passenger air bag module bolts | 80 (9) |
| Radio screws | 16 (1.8) |
| Sensing & Diagnostic Module (SDM) bolts | 80 (9) |
| Side Impact Sensor (SIS) bolts | 80 (9) |
| Upper steering column cover screws | 13 (1.5) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.