Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Activating System
2004 Oldsmobile Bravada RWDSECTION Activating System
WARNING: This page is about a different car, the 2000 Buick Park Avenue. However, it is still accessible from the selected car via links, so may be relevant.
- Ensure ignition key is in LOCK position. Connect driver and passenger side impact air bag connectors located under driver and
- passenger seats. Install Connector Position Assurance (CPA) Clip. See Figure. Connect passenger-side air bag connector and install Connector Position Assurance (CPA) Clip. See Figure. Install knee bolster.
- Connect driver-side air bag connector and install Connector Position Assurance (CPA) clip. See Figure. Install knee bolster. Install SIR fuse in fuse block. See Figure. Check system for proper operation. See SYSTEM OPERATION CHECK .
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.