Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
DTC P0201-P0206: Injector Control Circuit: Description
The Powertrain Control Module (PCM) enables appropriate fuel injector on intake stroke for each cylinder. Ignition voltage is supplied to fuel injectors. The PCM controls each fuel injector by grounding control circuit via a solid state device called a driver. The PCM monitors status of each driver. If control module detects an incorrect voltage for commanded state of the driver, a fuel injector control DTC sets.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.