SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA RWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1028 (WIPER SYSTEM & WASHER SYSTEM)COMPONENT LOCATORWIPER/WASHER SYSTEM CONNECTORS
2004 Oldsmobile Bravada RWD

Wiper/Washer System Connectors

2004 Oldsmobile Bravada RWDSECTION Wiper/Washer System Connectors
WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Windshield Washer Fluid Pump

GM635009Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 12052641
  • 2-Way F Metri-Pack 150 Series (BLK)
Pin Wire Color Circuit No. Function
A RED 228 Windshield Washer Pump Control
B BLK 150 Ground
Washer Fluid Level Switch

GM655692Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 12162195
  • 2-Way F Metri-Pack 150.2 Series, Sealed (BLK)
Pin Wire Color Circuit No. Function
A BLK/WHT 174 Low Washer Fluid Indicator Signal
B BLK 150 Ground
Windshield Wiper Motor Module

GM812593Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 12186347
  • 6-Way F Metri-Pack 150 (GRY)
Pin Wire Color Circuit No. Function
A BLK 1050 Ground
B YEL 143 Accessory Voltage
C DK BLU 477 Windshield Wiper Switch High Signal
D PNK 94 Windshield Wiper Switch Signal
E ORN 2268 Windshield Washer Relay Control
F GRY 478 Windshield Wiper Switch Supply Voltage
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.