Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA RWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1002 (SEAT SYSTEM)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2004 Oldsmobile Bravada RWD
Fastener Tightening Specifications
2004 Oldsmobile Bravada RWDSECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Armrest Bolts | 9 N.m | 80 lb in |
| Armrest Trim Cover Screws | 2 N.m | 18 lb in |
| Bench Seat Back Frame Bolts | 53 N.m | 39 lb ft |
| Bench Seat Grab Handle Bolts | 30 N.m | 22 lb ft |
| Bench Seat Rear Riser Latch Bolts | 53 N.m | 39 lb ft |
| Cushion Front Nuts | 21 N.m | 15 lb ft |
| Cushion Side Bolts | 35 N.m | 26 lb ft |
| Folding Head Restraint Assembly Bolts | 7 N.m | 61 lb in |
| Front Recliner Attachment Bolts | 53 N.m | 39 lb ft |
| Front Seat Belt Buckle Nut | 53 N.m | 39 lb ft |
| Hinge Assembly Bolts | 7 N.m | 61 lb in |
| Inboard Pivot Bolt | 35 N.m | 26 lb ft |
| Latch Cover Screws | 2 N.m | 18 lb in |
| Lumbar Switch Screws | 2 N.m | 18 lb in |
| Memory Module Screws | 3 N.m | 26 lb in |
| Outboard Pivot Bolt | 35 N.m | 26 lb ft |
| Outboard Seat Belt Anchor Bolt | 53 N.m | 39 lb ft |
| Outboard Seat Belt Anchor Nut | 53 N.m | 39 lb ft |
| Power Seat Switch Bezel Screws | 2 N.m | 18 lb in |
| Power Seat Switch Screws | 2 N.m | 18 lb in |
| Rear Heated Seat Switch Screw | 1.6 N.m | 14 lb in |
| Rear Seat Back Latch Bolt | 45 N.m | 33 lb ft |
| Rear Seat Back Latch Screw | 25 N.m | 18 lb ft |
| Recliner Arm Attachment Bolts | 53 N.m | 39 lb ft |
| Recliner/Release Handle Screws | 2 N.m | 18 lb in |
| Recliner Screw | 10 N.m | 89 lb in |
| Seat Back Folding Mechanism Bolts | 21 N.m | 15 lb ft |
| Seat Back Side Bolts | 35 N.m | 26 lb ft |
| Seat Belt Tower Cover Screw | 1.9 N.m | 17 lb in |
| Seat Front Retaining Nuts | 55 N.m | 41 lb ft |
| Seat Rear Retaining Bolts | 55 N.m | 41 lb ft |
| Trim Panel Screws | 2 N.m | 18 lb in |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.