Power Seat Systems Component Views

2004 Oldsmobile Bravada RWDSECTION Power Seat Systems Component Views
WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Driver Seat Component Views (1 Of 2)
GM854624Courtesy of GENERAL MOTORS CORP.
Callout Component Name
1 C321
2 Seat Adjuster Switch - Driver
3 Memory Seat Module - C4
4 Memory Seat Module - C3
5 Seat Bolster/Lumbar Switch - Driver
6 Seat Recliner Motor - Driver
7 C305
8 C323
9 C325
10 C322
11 Seat Rear Vertical Motor - Driver
12 Seat Front Vertical Motor - Driver
13 Memory Seat Module - C2
14 Memory Seat Module - C1
15 Seat Horizontal Motor - Driver
16 C320
Fig 2: Driver Seat Component Views (2 Of 2)
GM854618Courtesy of GENERAL MOTORS CORP.
Callout Component Name
1 Seat Bolster Motor - Driver
2 Seat Lumbar Motor - Driver
3 Heated Seat Element - Driver Cushion
4 C324
5 Seat Belt Switch Connector
6 Heated Seat Element - Driver Cushion Connector
Fig 3: Front Passenger Seat Component Views (1 Of 2) (W/ AN3)
GM854616Courtesy of GENERAL MOTORS CORP.
Callout Component Name
1 Seat Horizontal Motor - Front Passenger
2 Seat Front Vertical Motor - Front Passenger
3 Seat Rear Vertical Motor - Front Passenger
4 C388
5 C326
6 C399
7 Seat Recliner Motor - Front Passenger
8 Seat Adjuster Switch - Front Passenger
9 Seat Adjuster Switch Connector
Fig 4: Front Passenger Seat Component Views (2 Of 2) (W/ AN3)
GM854613Courtesy of GENERAL MOTORS CORP.
Callout Component Name
1 Seat Bolster Motor - Front Passenger
2 Seat Lumbar Motor - Front Passenger
3 Heated Seat Element - Front Passenger Cushion Connector
4 C329
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.