Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 996 (ENGINE CONTROLS - 6.6L (LLY) (INTRODUCTION))SPECIFICATIONSTEMPERATURE VS RESISTANCE
2004 Oldsmobile Bravada AWD
Temperature vs Resistance
2004 Oldsmobile Bravada AWDSECTION Temperature vs Resistance
WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Temperature vs Resistance
| °C | °F | OHMS |
|---|---|---|
| Temperature vs Resistance Values (Approximate) | ||
| 150 | 302 | 47 |
| 140 | 284 | 60 |
| 130 | 266 | 77 |
| 120 | 248 | 100 |
| 110 | 230 | 132 |
| 100 | 212 | 177 |
| 90 | 194 | 241 |
| 80 | 176 | 332 |
| 70 | 158 | 467 |
| 60 | 140 | 667 |
| 50 | 122 | 973 |
| 45 | 113 | 1188 |
| 40 | 104 | 1459 |
| 35 | 95 | 1802 |
| 30 | 86 | 2238 |
| 25 | 77 | 2796 |
| 20 | 68 | 3520 |
| 15 | 59 | 4450 |
| 10 | 50 | 5670 |
| 5 | 41 | 7280 |
| 0 | 32 | 9420 |
| -5 | 23 | 12300 |
| -10 | 14 | 16180 |
| -15 | 5 | 21450 |
| -20 | -4 | 28680 |
| -30 | -22 | 52700 |
| -40 | -40 | 100700 |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.