Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 981 (ANTILOCK BRAKE SYSTEM AND TRACTION CONTROL SYSTEM)COMPONENT LOCATORABS CONNECTORS
2004 Oldsmobile Bravada AWD
ABS Connectors
2004 Oldsmobile Bravada AWDSECTION ABS Connectors
WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Electronic Brake Control Module (EBCM) - C1
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | BLK | 2150 | Ground |
| B | RED | 442 | Battery Positive Voltage |
Electronic Brake Control Module (EBCM) - C2 (10/20 Series w/o HP2)
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A1 | BRN | 441 | Ignition 3 Voltage |
| A2 | YEL | 873 | Left Front Wheel Speed Sensor Low Reference |
| A3 | DK GRN | 872 | Right Front Wheel Speed Sensor Signal |
| A4 | TAN/BLK | 464 | Delivered Torque Signal |
| A5 | - | - | Not Used |
| A6 | WHT | 1808 | Service Traction Control Signal (w/ Traction Assist) |
| A7 | - | - | Not Used |
| A8 | BLK/WHT | 1695 | Axle Switch Signal (w/o NW7) |
| BLK/WHT | 1695 | Traction Control Switch Signal (w/ NW7) | |
| B1 | YEL/BLK | 1827 | Vehicle Speed Signal |
| B2 | LT BLU | 830 | Left Front Wheel Speed Sensor Signal |
| B3 | TAN | 833 | Right Front Wheel Speed Sensor Low Reference |
| B4 | ORN/BLK | 463 | Requested Torque Signal |
| B5 | PPL | 420 | TCC Brake Switch/Cruise Control Release Signal |
| B6 | LT BLU | 1122 | ABS/TCS Class 2 Serial Data |
| B7 | - | - | Not Used |
| B8 | PPL | 333 | Brake Fluid Level Sensor Signal |
Electronic Brake Control Module (EBCM) - C2 (30 Series and HP2)
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A1 | YEL | 873 | Left Front Wheel Speed Sensor Low Reference |
| A2 | DK GRN | 872 | Right Front Wheel Speed Sensor Signal |
| A3 | PPL | 420 | TCC Brake Switch/Cruise Control Release Signal |
| A4-A7 | - | - | Not Used |
| A8 | BLK/WHT | 1695 | Axle Switch Signal |
| A9 | LT BLU | 1122 | ABS/TCS Class 2 Serial Data |
| A10 | PPL | 333 | Brake Fluid Level Sensor Signal |
| B1 | LT BLU | 830 | 'Left Front Wheel Speed Sensor Signal |
| B2 | TAN | 833 | Right Front Wheel Speed Sensor Low Reference |
| B3 | YEL/BLK | 1827 | Vehicle Speed Signal |
| B4-B6 | - | - | Not Used |
| B7 | ORN/BLK | 463 | Requested Torque Signal (HP2) |
| B8-B9 | - | - | Not Used |
| B10 | BRN | 441 | Ignition 3 Voltage |
Traction Control Switch (NW7)
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | BLK/WHT | 1851 | Ground |
| B-E | - | - | Not Used |
| F | BRN/WHT | 230 | Instrument Panel Lamps Dimming Control |
| G | BRN/WHT | 1571 | Axle Switch Signal |
| H | BRN | 441 | Ignition 3 Voltage |
Wheel Speed Sensor (WSS) - LF
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | LT BLU | 830 | Left Front Wheel Speed Sensor Signal |
| B | YEL | 873 | Left Front Wheel Speed Sensor Low Reference |
Wheel Speed Sensor (WSS) - RF
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | DK GRN | 872 | Right Front Wheel Speed Sensor Signal |
| B | TAN | 833 | Right Front Wheel Speed Sensor Low Reference |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.