Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 967 (DATA LINK COMMUNICATION SYSTEM)COMPONENT LOCATORDATA LINK COMMUNICATIONS CONNECTORS
2004 Oldsmobile Bravada AWD
Data Link Communications Connectors
2004 Oldsmobile Bravada AWDSECTION Data Link Communications Connectors
WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Data Link Connector (DLC)
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1 | - | - | Not Used |
| 2 | PPL | 1132 | DLC Class 2 Serial Data |
| 3 | - | - | Not Used |
| 4 | BLK | 1850 | Ground |
| 5 | BLK/WHT | 451 | Ground |
| 6 | TAN/WHT | 2500 | High Speed GMLAN Serial Data (+) (HP2) |
| 7-13 | - | - | Not Used |
| 14 | TAN | 2501 | High Speed GMLAN Serial Data (-) (HP2) |
| 15 | - | - | Not Used |
| 16 | ORN | 640 | Battery Positive Voltage |
Splice Pack - SP205
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | ORN | 1044 | Radio Class 2 Serial Data |
| PNK | 1045 | Serial Communications Circuit | |
| B | DK GRN | 1049 | PCM Class 2 Serial Data |
| C | DK GRN/WHT | 1133 | ATC Class 2 Serial Data (NP1 or NP8) |
| LT BLU | 1122 | ABS Class 2 Serial Data | |
| D | PPL | 1132 | DLC Class 2 Serial Data |
| PPL | 1807 | Class 2 Serial Data (Primary) (w/AU8) | |
| E | WHT | 1038 | HVAC Class 2 Serial Data |
| F | TAN | 1047 | PDM Class 2 Serial Data |
| G | GRY | 1036 | IPC Class 2 Serial Data |
| H | DK BLU/WHT | 2218 | Serial Communications Circuit |
| J | GRY | 2567 | Rear Wheel Steering Control Module Class 2 Serial Data - w/ NYS |
| K | YEL | 2470 | Allison Class 2 Serial Data - w/ M74 |
| PPL/WHT | 5687 | HCM Class 2 Serial Data (HP2) | |
| L | BRN | 1046 | DDM Class 2 Serial Data |
| M | LT GRN | 1037 | BCM Class 2 Serial Data |
Splice Pack - SP207 (Base and Uplevel)
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | - | - | Not Used |
| B | PNK | 1045 | RFA Class 2 Serial Data |
| C | YEL | 1127 | Trip Computer/Nav Class 2 Serial Data |
| D-F | - | - | Not Used |
| G | LT BLU | 2288 | LGM Class 2 Serial Data (UK6) |
| H | LT GRN/ BLK |
1098 | VCM (Vehicle Communication) Class 2 Serial Data - w/ U42 |
| J | - | - | Not Used |
| K | LT GRN | 2271 | ADG Class 2 Serial Data w/ U2K &U2L |
| L-M | - | - | Not Used |
Splice Pack - SP207 (Luxury)
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | - | - | Not Used |
| B | PNK | 1045 | RFA Class 2 Serial Data |
| C | YEL | 1127 | Trip Computer/Nav Class 2 Serial Data |
| D | TAN | 5072 | Remote Playback Device Class 2 Serial Data - w/ U1S |
| E | - | - | Not Used |
| F | DK BLU | 2272 | Amplifier Class 2 Serial Data |
| G | LT BLU | 2288 | LGM Class 2 Serial Data |
| H | LT GRN/ BLK |
1098 | VCM (Vehicle Communication) Class 2 Serial Data - w/ U42 |
| J | - | - | Not Used |
| K | LT GRN | 2271 | ADG Class 2 Serial Data - w/U2K & U2L |
| L-M | - | - | Not Used |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.