Fastener Tightening Specifications

2004 Oldsmobile Bravada AWDSECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications

Application Specification
Metric English
Cargo Tie Down Loop Bolt 35 N.m 26 lb ft
Child Restraint Tether Anchor Bolt 24 N.m 18 lb ft
Jump Seat Belt Bolts 55 N.m 41 lb ft
Jump Seat Belt Buckle Bolts 55 N.m 41 lb ft
Rear Seat Belt Buckle Bolt 42 N.m 31 lb ft
Rear Seat Belt Nuts 80 N.m 59 lb ft
Seat Belt Anchor Bolts 70 N.m 52 lb ft
Seat Belt Buckle Bolt 70 N.m 52 lb ft
Seat Belt Retractor Assembly Bolt 70 N.m 52 lb ft
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.