SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 959 (BODY REAR END)SPECIFICATIONS
2004 Oldsmobile Bravada AWD

Section 959 (Body Rear End): Specifications

2004 Oldsmobile Bravada AWDSECTION Specifications
WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications

Application Specification
Metric English
Body Mount Bolts 70 N.m 52 lb in
Cargo Net Button 2 N.m 18 lb in
Endgate Bellcrank Bolts 9 N.m 80 lb in
Endgate Cover Screws 1 N.m 11 lb in
Endgate Inside Handle Screws 3 N.m 25 lb in
Endgate Latch Bolts 10 N.m 88 lb in
Endgate Striker Bolts 22 N.m 16 lb ft
Endgate Support Bolts 3 N.m 25 lb in
Endgate Torque Rod Bracket to Body Bolts 10 N.m 88 lb in
Endgate Torque Rod Insulator to Endgate Bolts 25 N.m 18 lb ft
Endgate Trim Panel Screws 2 N.m 17 lb in
Endgate Window Hinge Bolts 6 N.m 53 lb in
Endgate Window Latch Bolts 9 N.m 80 lb in
Endgate Window Latch Nuts 10 N.m 88 lb in
Liftgate Assist Handle Screw 2 N.m 17 lb in
Liftgate Bellcrank Bolts 9 N.m 80 lb in
Liftgate Latch Screws 9 N.m 80 lb in
Liftgate Outside Handle Bolts 4 N.m 35 lb in
Liftgate Side Bumper Bolts 22 N.m 16 lb ft
Liftgate Striker Bolts 22 N.m 16 lb ft
Liftgate Trim Panel Screw 2 N.m 17 lb in
Liftgate Upper Quarter Applique Screw 5 N.m 44 lb in
Liftgate Window Latch Nuts 10 N.m 88 lb in
Liftgate Window Latch Support Bolts 9 N.m 80 lb in
Pickup Box Endgate Hinge to Endgate Bolts 25 N.m 18 lb ft
Pickup Box Endgate Hinge to Pickup Box Bolts 25 N.m 18 lb ft
Pickup Box Endgate Latch Bolts 25 N.m 18 lb ft
Pickup Box Endgate Latch Handle Bolts 25 N.m 18 lb ft
Pickup Box Endgate Striker Bolts 25 N.m 18 lb ft
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.