Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Power Window System Controls
The power window system will operate anytime the Retained Accessory Power (RAP) system is active or when the ignition switch is in the ACCY or ON position.
The LF power window master switch can control the up and down functions of all the windows in the vehicle. The passenger door power window switches can only control the up and down functions of the individual window. The power window master switch also contains a lockout switch (4-door vehicles).
The lockout switch controls the power window master switch lockout signal circuit. When the lockout switch is in the OFF position, the power window master switch lockout signal circuit is complete and the passenger door power window switches function normally. When the lockout switch is in the ON position, the power window master switch lockout signal circuit is interrupted and the passenger door window switches cannot control the up and down functions of the power windows.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.