SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 952 (EXTERIOR TRIM)SPECIFICATIONS
2004 Oldsmobile Bravada AWD

Section 952 (Exterior Trim): Specifications

2004 Oldsmobile Bravada AWDSECTION Specifications
WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications

Application Specification
Metric English
Front Fender Body Side Molding Screws 1.9 N.m 17 lb in
Front Wheel Opening Flair Nuts 1.6 N.m 14 lb in
Front Wheel Opening Flair Screws 1.6 N.m 14 lb in
Front Wheel Opening Molding Screws 1.9 N.m 17 lb in
Rear Wheel Opening Flare Screws 1.9 N.m 17 lb in
Rear Wheel Opening Molding Screws 1.9 N.m 17 lb in
Rocker Panel Molding Screws (Jimmy/Envoy) 7 N.m 62 lb in
Rocker Panel Molding Screws (Trailblazer) 1.9 N.m 17 lb in
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.