Cooling System Specifications

2004 Oldsmobile Bravada AWDSECTION Cooling System Specifications
WARNING: This page does not describe the selected car, but rather 62 other vehicles, including the 2002 Saturn SL2, 2002 Saturn SL1, 2002 Saturn SL, 2002 Saturn SC2, and 2002 Saturn SC1. However, it is still accessible from the selected car via links, so may be relevant.
COOLING SYSTEM SPECIFICATIONS - CARS

Application Specification
Coolant Replacement Interval
Except Prizm 60 Months Or 150,000 Miles
Prizm 24 Months Or 30,000 Miles
Coolant Capacity (1)
1.8L
Prizm
A/T 6.4 Qts. (5.7L)
M/T 6.6 Qts. (5.8L)
1.9L 7.0 Qts. (6.6L)
2.2L
"J" Body
DOHC 8.6 Qts. (8.1L)
SOHC 10.2 Qts. (9.7L)
"N" Body 8.6 Qts. (8.1L)
Saturn "L" Series & Vue A/T 7.3 Qts. (6.9L)
Vue M/T 7.4 Qts. (7.0L)
2.4L
"J" Body 9.9 Qts. (9.4L)
3.0L
Saturn "L" Series & Vue 7.8 Qts. (7.3L)
3.1L
"N" Body 13.6 Qts. (12.9L)
"W" Body
Century 11.3 Qts. (10.7L)
Grand Prix 11.0 Qts. (10.4L)
3.4L
Grand Am 13.6 Qts. (12.9L)
Impala & Monte Carlo 11.3 Qts. (10.7L)
3.5L 10.0 Qts. (9.5L)
3.8L
"C" Body 13.0 Qts. (12.3L)
"F" Body
A/T 11.4 Qts. (10.8L)
M/T 11.6 Qts. (11.0L)
"H" Body 10 Qts. (9.5L)
"W" Body 5.3 Qts. (5.0L)
Grand Prix 11.2 Qts. (10.6L)
Impala & Monte Carlo 11.7 Qts. (11.1L)
4.0L 13.0 Qts. (12.3L)
4.6L
DeVille & Seville 13.0 Qts. (12.3L)
Eldorado 12.5 Qts. (11.8L)
5.7L
"F" Body
A/T 11.8 Qts. (11.2L)
M/T 11.9 Qts. (11.3L)
"Y" Body 12.6 Qts. (11.9L)
Pressure Cap
Prizm 13 psi
Saturn
"L" Series 2.2L & Vue 13-17 psi
"L" Series 3.0L 20-21 psi
"S" Series 13-17 psi
All Others (2) 15 psi
Thermostat
Prizm
Starts To Open 176-183°F (80-84°C)
Fully Opens 203°F (95°C)
Saturn
"L" Series & Vue
Starts To Open 194°F (90°C)
"S" Series
Starts To Open 182-190°F (83-88°C)
Fully Open 212-222°F (100-106°C)
All Others
Starts To Open 195°F (91°C)
(1) Specification is approximate and includes heater capacity.
(2) Or specification stamped on cap.
COOLING SYSTEM SPECIFICATIONS - TRUCKS

Application Specification
Coolant Replacement Interval
Except Tracker 60 Months Or 150,000 Miles
Tracker 30 Months Or 30,000 Miles
Coolant Capacity (1)
2.0L 6.9 Qts. (6.5L)
2.2L 9.9 Qts. (9.4L)
2.5L 8.5 Qts. (8.0L)
3.4L
"A" & "B" Series
With Rear Heater 9.6 Qts. (9.0L)
"U", "V" & "X" Series
With Rear Heater 11.9 Qts. (11.3L)
Without Rear Heater 9.6 Qts. (9.0L)
4.2L 13.9 Qts. (13.2L)
4.3L
"C" & "K" Series
A/T 12.6 Qts. (11.9L)
M/T 12.9 Qts. (12.2L)
"G" Series
With Rear Heater 14.0 Qts. (13.2L)
Without Rear Heater 11.0 Qts. (10.5L)
"L" & "M" Series
With Rear Heater 16.5 Qts. (15.5L)
Without Rear Heater 13.5 Qts. (12.8L)
"S" & "T" Series
A/T 13.8 Qts. (13.1L)
M/T 14.1 Qts. (13.3L)
4.8L
Sierra & Silverado
A/T 13.4 Qts. (12.7L)
M/T 13.7 Qts. (13.0L)
Tahoe & Yukon
With Rear A/C 15.8 Qts. (15.0L)
Without Rear A/C 14.4 Qts. (13.6L)
5.0L
With Rear Heater 20.0 Qts. (18.9L)
Without Rear Heater 17.0 Qts. (16.0L)
5.3L
Avalanche 16.5 Qts. (15.6L)
Escalade 18.6 Qts. (17.6L)
Sierra & Silverado
With A/C 14.9 Qts. (14.1L)
Without A/C 13.4 Qts. (12.7L)
Suburban, Tahoe & Yukon
With Rear A/C 15.8 Qts. (15.0L)
Without A/C 14.4 Qts. (13.6L)
5.7L
Standard
With Rear Heater 20.0 Qts. (18.9L)
Without Rear Heater 17.5 Qts. (16.6L)
6.0L
Escalade 19.0 Qts. (17.9L)
Sierra & Silverado
A/T With Oil Cooler 14.4 Qts. (13.6L)
A/T Without Oil Cooler 14.8 Qts. (14.0L)
M/T With Oil Cooler 14.8 Qts. (14.0L)
M/T Without Oil Cooler 15.2 Qts. (14.4L)
Suburban & Yukon
With Oil Cooler 15.4 Qts. (14.6L)
Without Oil Cooler 15.8 Qts. (15.0L)
6.5L N/A
6.6L
A/T 20.3 Qts (19.2L)
M/T 20.7 Qts. (19.6L)
8.1L
Avalanche 24.0 Qts. (22.7L)
"C" & "K" Series Except Avalanche
A/T 20.7 Qts. (19.6L)
M/T 21.1 Qts. (20.0L)
"G" Series
With Rear Heater 26.0 Qts. (24.6L)
Without Rear Heater 23.0 Qts. (21.8L)
Pressure Cap
Except Tracker 15 psi
Tracker 13 psi
Thermostat Opens
Diesel
6.5L
Starts 185°F (85°C)
6.6L
Front Starts 180°F (82°C)
Front Fully Open 203°F (95°C)
Rear Starts 185°F (85°C)
Front Fully Open 212°F (100°C)
Gasoline Except Tracker
Starts 195°F (91°C)
Tracker
Starts 179°F (82°C)
Fully Open 203°F (95°C)
(1) Specification is approximate and includes heater capacity.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.