Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 94 (AUTOMATIC TRANSMISSION - SERVICING - EXCEPT ALLISON)TORQUE SPECIFICATIONS
2004 Oldsmobile Bravada AWD
Torque Specifications
2004 Oldsmobile Bravada AWDSECTION Torque Specifications
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, and 2002 GMC C3500 HD. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |||
|---|---|---|---|---|
| Auxiliary Oil Cooler Nut | 17 (23) | |||
| Extension Housing Bolt | ||||
| 4L60-E | 33 (45) | |||
| 4L80-E | 25 (34) | |||
| Filler Tube Nut (4L80-E) | 18 (24) | |||
| Filler Tube Stud | 35 (47) | |||
| Forward Servo Cover Bolt | 18 (24) | |||
| Heat Shield Bolt | 13 (17) | |||
| Oil Pan Drain Plug | 13 (18) | |||
| Park Lock Bracket Bolt | 18 (24) | |||
| Park/Neutral Position Switch Bolt | 21 (28) | |||
| Reverse Servo Cover Bolt | 18 (24) | |||
| Shift Cable Bracket Bolt | 18 (24) | |||
| Transmission Control Lever Nut | 18 (24) | |||
| INCH Lbs. (N.m) | ||||
| Accumulator-To-Case Bolt | 97 (11) | |||
| Auxiliary Oil Cooler Support Bolt | 106 (12) | |||
| Filler Tube Bolt (4L60-E) | 53 (6) | |||
| Fluid Pressure Switch | 97 (11) | |||
| Manual Detent Spring Bolt | 97 (11) | |||
| Oil Pan Bolt | 97 (11) | |||
| Oil Pass Cover Bolt | 97 (11) | |||
| Pressure Control Solenoid Bolt | 97 (11) | |||
| Shift Cable Bracket Bolt | 89 (10) | |||
| TCC Solenoid Bolt | 97 (11) | |||
| Transmission Fluid Indicator Stop Bolt | 97 (11) | |||
| Valve Body-To-Case Bolt (1) | 97 (11) | |||
| Vent Tube Clamp | 89 (10) | |||
| VSS Bolt | 97 (11) | |||
|
||||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.