Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 936 (TIRES AND WHEELS)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2004 Oldsmobile Bravada AWD
Fastener Tightening Specifications
2004 Oldsmobile Bravada AWDSECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Spare Tire Carrier Mounting Bolts (4WD Utility) | 30 N.m | 22 lb ft |
| Spare Tire Carrier to Body Side Inner Panel Mounting Bolts (2-Door Utility) | 30 N.m | 22 lb ft |
| Spare Tire Carrier to Frame Mounting Nuts (4-Door Utility) | 37 N.m | 27 lb ft |
| Spare Tire Carrier to Rear Crossmember Mounting Bolts (4-Door Utility) | 11 N.m | 100 lb in |
| Spare Tire Carrier to Rear Crossmember Mounting Nuts (Pickup) | 26 N.m | 19 lb ft |
| Spare Tire to Spare Tire Carrier Mounting Nuts (4WD Utility) | 100 N.m | 74 lb ft |
| Wheel Nut | 136 N.m | 100 lb ft |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.