Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 858 (SEAT BELT SYSTEM)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2004 Oldsmobile Bravada AWD
Fastener Tightening Specifications
2004 Oldsmobile Bravada AWDSECTION Fastener Tightening Specifications
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Yukon, 2003 Chevrolet Tahoe, 2003 Chevrolet Suburban, and 2003 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Center Front Seat Belt Bolt | 53 N.m | 39 lb ft |
| Center Front Seat Belt Buckle Bolt | 53 N.m | 39 lb ft |
| Center Rear Seat Belt Anchor Bolt | 52 N.m | 38 lb ft |
| Center Rear Seat Belt Retractor Bolt | 52 N.m | 38 lb ft |
| Front Seat Belt Buckle Nut | 53 N.m | 39 lb ft |
| Front Seat Retractor Bolt | 53 N.m | 39 lb ft |
| Front Seat Upper Anchor Bolt | 53 N.m | 39 lb ft |
| Outboard Seat Belt Anchor Nut | 53 N.m | 39 lb ft |
| Rear Seat Belt Buckle Bolt | 53 N.m | 39 lb ft |
| Rear Seat Belt Latch Cover Screw | 2 N.m | 18 lb in |
| Rear Seat Belt Retractor Bolts | 53 N.m | 39 lb ft |
| Rear Seat Belt to Body Bolt | 55 N.m | 41 lb ft |
| Retractor Tower Screw | 2 N.m | 18 lb in |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.