Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 813 (BODY & ACCESSORIES CONTROL SYSTEM)PASSENGER JUNCTION BOX (PJB) REMOVAL/INSTALLATIONPJB REMOVAL NOTE

2004 Oldsmobile Bravada AWD

PJB Removal Note

2004 Oldsmobile Bravada AWDSECTION PJB Removal Note

WARNING: This page is about a different car, the 2004 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.

Turn the screws counterclockwise to remove the PJB.
NOTE:
- Screws cannot be removed from the PJB.
  
  Fig 1: Passenger Junction Box Screws
  Courtesy of MAZDA MOTORS CORP.
Remove the PJB as shown in the figure.

Fig 2: Removing Passenger Junction Box
Courtesy of MAZDA MOTORS CORP.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.