Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 804 (AUTOMATIC TRANSAXLE [SHIFT MECHANISM])EMERGENCY OVERRIDE BUTTON INSPECTION
2004 Oldsmobile Bravada AWD
Emergency Override Button Inspection
2004 Oldsmobile Bravada AWDSECTION Emergency Override Button Inspection
WARNING: This page is about a different car, the 2004 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
- Turn the ignition switch to the LOCK position.
- Verify that the selector lever is in the P position.
- Without the brake pedal depressed, verify that the selector lever cannot be shifted from the P position.
- Remove the panel cover using a screwdriver as shown in the figure.
- Insert the screwdriver into the emergency override hole and push it down. Verify that the selector lever can be shifted from the P position.
- If there is any malfunction, replace the selector lever component. (See SELECTOR LEVER COMPONENT REMOVAL/INSTALLATION .)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.