SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 787 (BODY REAR END)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2004 Oldsmobile Bravada AWD

Fastener Tightening Specifications

2004 Oldsmobile Bravada AWDSECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2002 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
Identifying Fastener Tightening Specifications

Application Specification
Metric English
Fuel Tank Filler Door Screws 2 N.m 18 lb in
Fuel Tank Filler Pocket Screws 2 N.m 18 lb in
High-Mount Stop Lamp Screws 2 N.m 18 lb in
Rear Compartment Hinge to Body Bolts 11 N.m 97 lb in
Rear Compartment Lid Applique Nuts 2 N.m 18 lb in
Rear Compartment Lid Lock Bolts 11 N.m 97 lb in
Rear Compartment Lid Lock Striker Nuts 7 N.m 62 lb in
Rear Compartment Lid Spoiler Nuts 5 N.m 44 lb in
Rear Compartment Lid to Hinge bolts 10 N.m 89 lb in
Tail Lamp Nuts 2 N.m 18 lb in
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.