Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 771 (ENGINE MECHANICAL - 3.1L (UNIT REPAIR))TORQUE SPECIFICATIONS
2004 Oldsmobile Bravada AWD
Torque Specifications
2004 Oldsmobile Bravada AWDSECTION Torque Specifications
WARNING: This page is about a different car, the 2002 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |||||
|---|---|---|---|---|---|---|
| Camshaft Sprocket Bolt | 103 (140) | |||||
| Crankshaft Balancer Bolt | 76 (103) | |||||
| Cylinder Head Bolt (1) | ||||||
| First Pass | 44 (60) | |||||
| Final Pass | Tighten an Additional 95° | |||||
| Drive Belt Tensioner Bolt | 37 (50) | |||||
| Engine Coolant Temperature (ECT) Sensor | 17 (23) | |||||
| Engine Mount-to-Engine Mount Bracket Bolt | 43 (58) | |||||
| Engine Mount to Body Nut | 32 (43) | |||||
| Engine Mount to Engine Mount Adapter Plate Nut | 35 (47) | |||||
| Engine Oil Drain Plug | 18 (25) | |||||
| Flywheel Bolt | 61 (83) | |||||
| Front Cover Bolt (Large) | 35 (47) | |||||
| Frojnt Cover Bolt (Small) | 15 (21) | |||||
| Oil Filter Adapter | 21 (29) | |||||
| Oil Level Indicator Tube Bolt | 18 (25) | |||||
| Oil Pan Bolt | 18 (25) | |||||
| Oil Pan Bolt (Side) | 37 (50) | |||||
| Oil Pump Nut | 30 (41) | |||||
| Oil Pump Drive Bolt | 27 (36) | |||||
| Timing Chain Tensioner Dampener Bolt | 15 (21) | |||||
| Upper Intake Manifold Bolt | 18 (25) | |||||
| Valve Lifter Guide Bolt | 89 (10) | |||||
| Water Outlet Bolt | 18 (25) | |||||
| INCH Lbs. (N.m) | ||||||
| Fuel Pipe Clip Bolt | 71 (8) | |||||
| Lower Intake Manifold Bolt (2) | 115 (13) | |||||
| Valve Rocker Arm Bolt | ||||||
| First Pass | 124 (14) | |||||
| Final Pass | Tighten an Additional 30° | |||||
| Valve Rocker Arm Cover Bolt | 89 (10) | |||||
|
||||||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.