Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Removal Procedure
2004 Oldsmobile Bravada AWDSECTION Removal Procedure
WARNING: This page is about a different car, the 2002 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the front door trim panel. Refer to Trim Panel Replacement - Side Front Door .
- Remove the outside rearview mirror. Refer to Mirror Replacement or Mirror Replacement-Remote .
- Remove the front door water reflector. Refer to Water Deflector Replacement - Front Door .
- Remove the front door outer belt sealing strip. Refer to Sealing Strip Replacement-Front Door Window Belt Outer .
- Remove the front door inner belt sealing strip. Refer to Sealing Strip Replacement-Rear Door Window Belt Inner .
- Remove the window channel bolts (2, 4) from the window run channel (1).
- Remove the front door window run channel (1) from the door pulling it from the window frame.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.