Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 700 (PARKING BRAKE SYSTEM)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2004 Oldsmobile Bravada AWD
Fastener Tightening Specifications
2004 Oldsmobile Bravada AWDSECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Cable Support Bracket Bolts | 85 N.m | 64 lb ft |
| Backing Plate Bolts | 135 N.m | 100 lb ft |
| Intermediate Cable Threaded Rod Nut | 3.5 N.m | 31 lb in |
| Park Brake Cable Bracket to Knuckle Bolt (NYS) | 61 N.m | 45 lb ft |
| Park Brake Cable Guide to Frame Bolt | 12 N.m | 106 lb in |
| Park Brake Cable to Rear Axle Clip Bolt | 25 N.m | 18 lb ft |
| Park Brake Cable to Shock Absorber Bracket Bolt | 25 N.m | 18 lb ft |
| Park Brake Lever Mounting Bolts | 25 N.m | 18 lb ft |
| Park Brake Shoe Retaining Clip Bolt | 3 N.m | 25 lb in |
| Park Brake Warning Lamp Switch Bolt | 3 N.m | 25 lb in |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.