Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Intake Manifold (Unit Repair) Removal: Removal
2004 Oldsmobile Bravada AWDSECTION Removal
WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
- Remove throttle body.
- Remove fuel pipe and bracket. Remove fuel rail assembly.
- Remove electrical harness from intake manifold.
- Remove knock sensor.
- Remove intake manifold retaining nuts and bolts.
- Remove intake manifold.
- Remove intake manifold gasket. The gasket is reusable if it is not damaged.
- If intake manifold needs to be replaced, transfer the following parts:
- Throttle body
- Throttle body gasket. The manifold to throttle body gasket is reusable if it is not damaged.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.