Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Engine Removal From Frame
2004 Oldsmobile Bravada AWDSECTION Engine Removal From Frame
WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
The transaxle remains mounted firmly in the cradle during removal.
NOTE:
Manual Transaxles require the engine to be moved approximately 100 mm. (4 in.) forward in cradle for input shaft disengagement.
- With engine/transaxle on table, attach engine lift hoist to engine lift hooks.
- Remove starter.
- Remove torque converter to flywheel bolts.
- Remove transaxle to engine bolts.
- Remove power takeoff unit (PTU) brackets to engine bolts (if equipped).
- Disconnect transaxle electrical connectors if equipped.
- If equipped with auto transaxle, disconnect PRNDL switch electrical connector.
- Separate engine from transaxle.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.