Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 601 (REAR SUSPENSION SYSTEM)REPAIR INSTRUCTIONSKNUCKLEINSTALLATION
2004 Oldsmobile Bravada AWD
Repair Instructions: Knuckle: Installation
2004 Oldsmobile Bravada AWDSECTION Installation
WARNING: This page is about a different car, the 2003 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
- Install the knuckle to the vehicle. See Figure.
- Hand start the strut to knuckle bolts and nuts. Do not tighten the nuts at this time.
- Connect the rear suspension trailing arm to the knuckle. See Figure. See TRAILING ARM .
- Connect the rear wheel spindle rods to the knuckle. See SPINDLE ROD .
- Install the bearing/hub assembly. See WHEEL BEARING/HUB (REAR) . Tighten the strut to knuckle bolts to 122 N.m (90 lb ft).
- Install the tire and wheel assembly.
- Lower the vehicle.
- Inspect the rear wheel alignment, adjust if necessary. See SPECIFICATIONS .
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.