Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 550 (AXLE SHAFTS - FRONT)TORQUE SPECIFICATIONS
2004 Oldsmobile Bravada AWD
Torque Specifications
2004 Oldsmobile Bravada AWDSECTION Torque Specifications
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, 2003 Chevrolet Blazer, and 2002 GMC Jimmy. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | ||
|---|---|---|---|
| Axle Shaft Nut | 103 (140) | ||
| Front Differential Carrier Shield Bolts | 18 (25) | ||
| Lower Ball Joint To Steering Knuckle Retaining Nut | 130 (176) | ||
| Lower Ball Joint To Steering Knuckle Retaining Nut | 79 (108) | ||
| Outer Tie Rod Ball Retaining Nut | 39 (53) | ||
| Shock Absorber Upper And Lower Mounting Nuts (1) | 54 (73) | ||
| Upper Ball Joint Retaining Nuts | 17 (23) | ||
| Upper Ball Joint To The Steering Knuckle Retaining Nut | 61 (83) | ||
| Wheel Lug Nuts | 103 (140) | ||
| Wheel Speed Sensor And Brake Hose Bracket To The Upper Control Arm Nuts | 18 (24) | ||
|
|||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.