Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 542 (AXLE SHAFTS)TORQUE SPECIFICATIONS
2004 Oldsmobile Bravada AWD
Torque Specifications
2004 Oldsmobile Bravada AWDSECTION Torque Specifications
WARNING: This page is about a different car, the 2003 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |||
|---|---|---|---|---|
| Axle Shaft Nut | 159 (216) | |||
| Bearing Lock Bolt | 24 (32) | |||
| Control Arm To Body Bolts | 101 (137 ) | |||
| Lock Nut Against The Outer Tie Rod | 55 (74) | |||
| Outer Tie Rod Nut (1) | 36 (49) | |||
| Wheel Lug Nuts | ||||
| First Tightening Pass | 39 (52) | |||
| Final Tightening Pass | 76 (103) | |||
| Wheel Speed Sensor Retaining Bolt | 36 (49) | |||
| INCHES (N.m) | ||||
| Engine Splash Shield Bolts | 89 (10) | |||
| Wheel Nut Caps | 27 (3) | |||
|
||||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.