Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 502 (COMMON SPECS & PROCEDURES)IGNITION SYSTEMSPARK PLUGSSPARK PLUG SPECIFICATIONS
2004 Oldsmobile Bravada AWD
Spark Plug Specifications
2004 Oldsmobile Bravada AWDSECTION Spark Plug Specifications
WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
SPARK PLUG SPECIFICATIONS
| Application | Specification | |
|---|---|---|
| Glow Plugs Type - 6.6L Diesel (VIN No.) | ||
| LB6 ("1") | GM 97226202 | |
| LLY ("2") | GM 97326305 | |
| Spark Plug Type (VIN No.) | ||
| 4.3L ( "X") | AC R41-932 | |
| 4.8L ("V"), 5.3L ("Z"& "T") , 6.0L ("U" & "N") & 8.1L ("G") | AC R41-985 | |
| Gap | Iridium .040 in. (1.04 mm) Platinum .060 in. (1.52 mm) |
|
| Tightening Torque | ||
| Glow Plugs | 13 Ft. Lbs. (18 N.m) | |
| Spark Plugs | Tighten to 15 ft. lbs. (20 N.m) when using NEW cylinder head. Tighten to 11 ft. lbs. (15 N.m) for all subsequent installations. | |
| Firing Order | ||
| 4.3L | 1-6-5-4-3-2 | |
| 4.8L, 5.3L, 6.0L & 8.1L | 1-8-7-2-6-5-4-3 | |
| 6.6L Diesel | 1-2-7-8-4-5-6-3 | |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.