Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Passlock™ Anti-Theft Learn Procedure
Passlock™ learn procedure must be performed when Passlock™ sensor, BCM or PCM are replaced. If only Passlock sensor was replaced, Auto Learn method my be used. See PASSLOCK™ ANTI-THEFT AUTO LEARN METHOD . BCM or PCM replacement requires Seed And Key method. Seed And Key method requires use of Tech 2 scan tool. See PASSLOCK™ ANTI-THEFT SEED & KEY METHOD .
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.