Engine Cooling Torque Specifications

2004 Oldsmobile Bravada AWDSECTION Engine Cooling Torque Specifications
WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE COOLING TORQUE SPECIFICATIONS

Application Ft. Lbs. (N.m)
Radiator Upper Support Bracket Bolts 14 (19)
INCH Lbs. (N.m) 
Radiator Drain Plug 9 (13)
Radiator Fan-To-Fan Motor Bolts 53 (6)
Radiator Fan-To-Fan Shroud Assembly Bolts 34 (3)
Radiator Fan Blade Nut 53 (6)
Thermostat Housing Nuts 89 (10)
Water Pump Bolts
1.8L, Gas Engine With MFI 80 (9)
1.8L, Gas Engine HO
1.18" Bolt 80 (9)
1.38" Bolt 97 (11)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.