Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 493 (COMMON SPECS & PROCEDURES)AIR CONDITIONINGMANUAL SYSTEMHVAC TORQUE SPECIFICATIONS
2004 Oldsmobile Bravada AWD
HVAC Torque Specifications
2004 Oldsmobile Bravada AWDSECTION HVAC Torque Specifications
WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
HVAC TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) |
|---|---|
| Compressor & Condenser Hose Assembly Bolt | 18 (25) |
| Compressor Mounting Bolts | 18 (25) |
| Condenser Mounting Bolts | 10 (13) |
| INCH Lbs. (N.m) | |
| Blower Motor Mounting Bolts | 89 (10) |
| Condenser Inlet Bolt | 48 (5.4) |
| Condenser Outlet Bolt | 48 (5.4) |
| Evaporator Case Screws | 89 (10) |
| HVAC Module Assembly Mounting Nuts | 89 (10) |
| Pressure Switch | 89 (10) |
| Receiver Inlet Tube Bolt | 48 (5.4) |
| Receiver Mounting Bolt | 89 (10) |
| Receiver Outlet Tube Bolt | 48 (5.4) |
| TXV Bolts | 48 (5.4) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.