Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 487 (COMMON SPECS & PROCEDURES)CHARGING SYSTEMGENERATORGENERATOR TORQUE SPECIFICATIONS
2004 Oldsmobile Bravada AWD
Generator Torque Specifications
2004 Oldsmobile Bravada AWDSECTION Generator Torque Specifications
WARNING: This page is about a different car, the 2003 Oldsmobile Bravada, 2003 GMC Envoy XL, 2003 GMC Envoy, and 2003 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
GENERATOR TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) |
|---|---|
| Battery Hold-Down Retainer Nut | 11 (15) |
| Battery Negative Cable Terminal Bolt | 11 (15) |
| Battery Positive Cable Terminal Bolt | 11 (15) |
| Battery Tray Bolt | 15 (20) |
| Engine Harness-To-Engine Block Bolt (4.2L) | 37 (50) |
| Engine Lift Hook Bolt (4.2L) | 37 (50) |
| Generator Bracket Bolt (5.3L) | 37 (50) |
| Generator Mounting Bolts | 37 (50) |
| Ground Terminal-To-Engine Block Bolt (5.3L) | 37 (50) |
| Starter Bolt | 37 (50) |
| INCH Lbs. (N.m) | |
| Battery Cable Channel Bolt (4.2L) | 106 (12) |
| Battery Positive Cable Lead-To-Starter Nut | 80 (9) |
| Battery Tray Brace Bolt | 89 (10) |
| Engine Harness-To-Shock Tower Bolt (4.2L) | 89 (10) |
| Engine Harness-To-Wheelhouse Panel Bolt (4.2L) | 89 (10) |
| Generator Cable Nut | 80 (9) |
| Ground Cable-To-Shock Tower Bolt (5.3L) | 89 (10) |
| Ground Terminal-To-Front Fender Bolt (5.3L) | 89 (10) |
| Positive Terminal-To-Underhood Junction Block Bolt | 89 (10) |
| Starter Solenoid Nut | 30 (3.4) |
| Transmission Cover Bolt (5.3L) | 80 (9) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.