Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 486 (COMMON SPECS & PROCEDURES)BATTERYGENERAL SERVICEBATTERY TORQUE SPECIFICATIONS
2004 Oldsmobile Bravada AWD
Battery Torque Specifications
2004 Oldsmobile Bravada AWDSECTION Battery Torque Specifications
WARNING: This page is about a different car, the 2003 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
BATTERY TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) |
|---|---|
| Battery Cable-To-Battery Terminal Retainer | 11 (15) |
| Body Ground Bolt | 10 (14) |
| Fuse and Relay Block-To-Inner Fender Bolts | 11 (15) |
| Ground Bolt | 17 (23) |
| INCH Lbs. (N.m) | |
| Battery Cable-To-Generator Retaining Nut | 71 (8) |
| Battery Hold Down Bracket Nuts | 71 (8) |
| Positive Battery Cable-To-Starter Solenoid Retaining Nut | 79 (9) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.