Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 485 (COMMON SPECS & PROCEDURES)ENGINE COOLINGSERVICEENGINE COOLING SPECIFICATIONS
2004 Oldsmobile Bravada AWD
Engine Cooling Specifications
2004 Oldsmobile Bravada AWDSECTION Engine Cooling Specifications
WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE COOLING SPECIFICATIONS
| Application | Specification | |||
|---|---|---|---|---|
| Coolant Capacity | ||||
| 2.2L With A/T | 9.7 (9.2) | |||
| 2.2L With M/T | 9.9 (9.4) | |||
| 4.3L Pickup | 14.0 (13.3) | |||
| 4.3L Utility | 11.9 (11.3) | |||
| Coolant Replacement Intervals | (1) 150,000 Miles | |||
| Thermostat Opening Temperatures | ||||
| Thermostat Starts To Open | 188°F (87°C) | |||
| Thermostat Fully Open | 206°F (97°C) | |||
|
||||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.