Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Auto A/C Sensor Inside Air Service Specifications
2004 Oldsmobile Bravada AWDSECTION Auto A/C Sensor Inside Air Service Specifications
WARNING: This page is about a different car, the 2003 Buick Regal and 2003 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
AUTO A/C SENSOR INSIDE AIR SERVICE SPECIFICATIONS
| °F (°C) | Resistance (Ohms) | Counts | Volts |
|---|---|---|---|
| -40 (-40) | 10,0701 | 248 | 4.86 |
| -31 (-35) | 72,449 | 246 | 4.82 |
| -22 (-30) | 52,671 | 242 | 4.74 |
| -13 (-25) | 38,672 | 238 | 4.66 |
| -4 (-20) | 28,661 | 232 | 4.54 |
| 5 (-15) | 21,430 | 226 | 4.43 |
| 14 (-10) | 16,159 | 217 | 4.25 |
| 23 (-5) | 12,282 | 208 | 4.07 |
| 32 (0) | 9407 | 197 | 3.86 |
| 41 (5) | 7273 | 184 | 3.6 |
| 50 (10) | 5666 | 171 | 3.35 |
| 59 (15) | 4447 | 156 | 3.05 |
| 68 (20) | 3514 | 142 | 2.78 |
| 77 (25) | 2795 | 127 | 2.49 |
| 86 (30) | 2237 | 113 | 2.21 |
| 95 (35) | 1802 | 100 | 1.96 |
| 104 (40) | 1459 | 87 | 1.7 |
| 113 (45) | 1188 | 76 | 1.49 |
| 122 (50) | 973 | 66 | 1.29 |
| 131 (55) | 804 | 57 | 1.11 |
| 140 (60) | 667 | 49 | 0.96 |
| 149 (65) | 557 | 42 | 0.82 |
| 158 (70) | 467 | 36 | 0.7 |
| 167 (75) | 393 | 31 | 0.6 |
| 176 (80) | 332 | 27 | 0.52 |
| 185 (85) | 282 | 23 | 0.45 |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.