Torque Specifications

2004 Oldsmobile Bravada AWDSECTION Torque Specifications
WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS

Application Ft. Lbs. (N.m)
Steering wheel nut 30 (41)
INCH Lbs. (N.m) 
Center console nut 89 (10)
Discriminating sensor bolts 89 (10)
Driver-side air bag module bolts 54 (6)
Glove box
Upper screws 17 (1.9)
Lower bolts 106 (12)
Instrument Panel Cluster (IPC) screws 27 (3.0)
Instrument panel trim pad
Air bag module bracket bolt 17 (1.9)
Cluster bezel bolt 12 (1.4)
Defroster duct bolt 17 (1.9)
Hinge pillar bolt 22 (2.5)
Knee bolster bolt 17 (1.9)
Passenger-side air bag module nuts 89 (10)
Sensing & Diagnostic Module (SDM) bolts 89 (10)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.