Diagnostic Tests: Notes

2004 Oldsmobile Bravada AWDSECTION Notes
WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
DIAGNOSTIC TROUBLE CODE (DTC) IDENTIFICATION

Trouble Code Possible Cause
B0016  Passenger deployment loop resistance low
B0017  Passenger deployment loop open
B0018  Passenger deployment loop short to ground/voltage
B0022  Driver deployment loop resistance low
B0024  Driver deployment loop short to ground/voltage
B0026  Driver deployment loop open
B0051  Deployment commanded
B0053  Deployment commanded with loop malfunction
B0090  Active switch voltage out of range
B0091  Active switch: Wrong state
B1000  Internal SDM failure
B1001  Option configuration error
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.