Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 473 (SUPPLEMENTAL INFLATABLE RESTRAINT SYSTEM)DIAGNOSTICSCOMPASS CALIBRATION & COMPASS MAGNETIC VARIATION ADJUSTMENTCOMPASS MAGNETIC VARIATION ADJUSTMENT
2004 Oldsmobile Bravada AWD
Compass Magnetic Variation Adjustment
2004 Oldsmobile Bravada AWDSECTION Compass Magnetic Variation Adjustment
WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Locate current geographic location (zone map) using world magnetic variation map. See Fig 1. Locate compass switch button. Depending on mirror model, switch button will be marked with COMP, COMPASS or ON/OFF.
- Turn ignition on, with engine off. Press and hold switch until a zone number appears on compass display. Depress compass switch to select desired zone map number. Wait 5 seconds. Mirror display will return to a compass reading. Variance procedure is complete. Calibrate compass. Go to COMPASS CALIBRATION .
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.