Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 472 (SUPPLEMENTAL INFLATABLE RESTRAINT SYSTEM)TORQUE SPECIFICATIONS
2004 Oldsmobile Bravada AWD
Torque Specifications
2004 Oldsmobile Bravada AWDSECTION Torque Specifications
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Yukon, 2003 Chevrolet Tahoe, 2003 Chevrolet Suburban, and 2003 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) |
|---|---|
| Front seat mounting nuts | 41 (56) |
| Seat belt retractor bolts | 39 (53) |
| Steering wheel nut | 30 (41) |
| INCH Lbs. (N.m) | |
| Electronic Frontal Sensor (EFS) bolt | 89 (10.0) |
| Instrument Panel Cluster (IPC) screws | 18 (2.0) |
| Instrument panel upper trim pad screws | 18 (2.0) |
| Passenger Presence System (PPS) ECU screws | 18 (2.0) |
| Passenger-side air bag module bolts | 80 (9.0) |
| Seat belt retractor cover screw | 18 (2.0) |
| Sensing & Diagnostic Module (SDM) fasteners | 89 (10.0) |
| Side impact air bag module bolts | 89 (10.0) |
| Side Impact Sensor (SIS) bolts | 89 (10.0) |
| Upper & lower steering column cover screws | 13 (1.5) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.