Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 462 (ENGINE CONTROLS - REMOVAL & INSTALLATION)TORQUE SPECIFICATIONS
2004 Oldsmobile Bravada AWD
Torque Specifications
2004 Oldsmobile Bravada AWDSECTION Torque Specifications
WARNING: This page is about a different car, the 2003 Oldsmobile Bravada, 2003 GMC Envoy XL, 2003 GMC Envoy, and 2003 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |||
|---|---|---|---|---|
| Accelerator Pedal Position Sensor Retaining Screws (5.3L) | 15 (20) | |||
| Air Cleaner Housing/Washer Solvent Tank Nuts | 11 (15) | |||
| Battery Cable-To-Battery Bolt | 11 (15) | |||
| Camshaft Position Sensor Retaining Bolt (5.3L) | 21 (29) | |||
| Crankshaft Sensor Retaining Bolt (5.3L) | 18 (25) | |||
| Engine Coolant Temperature Sensor | ||||
| 4.2L | 12 (16) | |||
| 5.3L | 15 (20) | |||
| Engine Lift Hook Bolts | 37 (50) | |||
| Fuel Filter Bracket Screw | (1) | |||
| Fuel Tank Shield Bolts | 18 (25) | |||
| Fuel Tank Strap Retaining Bolts | 24 (32) | |||
| Generator Mounting Bolts | 37 (50) | |||
| Intake Manifold Retaining Bolts | 12 (16) | |||
| Knock Sensor Retaining Bolt | ||||
| 4.2L | 18 (25) | |||
| 5.3L | 15 (20) | |||
| Oxygen Sensors | 30 (41) | |||
| Power Steering Pump Mounting Bolts | 18 (25) | |||
| Spark Plugs | ||||
| 4.2L | 13 (18) | |||
| 5.3L | 11 (15) | |||
| INCH Lbs. (N.m) | ||||
| Accelerator Pedal Position Sensor Retaining Screws (4.2L) | 89 (10) | |||
| A/C Line Bracket-To-Engine Lift Hook Bolt | 89 (10) | |||
| Air Cleaner Outlet Duct Bolt | 89 (10) | |||
| Air Cleaner Resonator Mounting Bolts | 53 (6) | |||
| Air Cleaner Resonator-To-Throttle Body Clamp | 35 (4) | |||
| Camshaft Position Actuator Solenoid Valve Mounting Bolt | 89 (10) | |||
| Camshaft Position Sensor Retaining Bolt (4.2L) | 89 (10) | |||
| Crankshaft Position Sensor Retaining Bolt (4.2L) | 89 (10) | |||
| Crossover Fuel Pipe Retainer Clip Attaching Screws | 34 (3.8) | |||
| Engine Wiring Harness Bracket Nut | 89 (10) | |||
| EVAP Canister Purge Solenoid Bolt (5.3L) | 93 (10.5) | |||
| Fuel Filter Bracket Screw (5.3L) | 108 (12) | |||
| Fuel Hose To Fuel Tank Clamp | 22 (2.5) | |||
| Fuel Pressure Regulator Retainer Screw | 71 (8) | |||
| Fuel Rail Retaining Bolts | 89 (10) | |||
| Fuel Return Line Retainer Screw | 71 (8) | |||
| Fuel Return Pipe Attaching Screw | 44 (5) | |||
| Generator Positive Post Cable Nut | 80 (9) | |||
| Ignition Coil Retaining Bolts | ||||
| 4.2L | 89 (10) | |||
| 5.3L | 71 (8) | |||
| PCM Harness Connector Fasteners | 71 (8) | |||
| PCM Mounting Bolts | (1) | |||
| TAC Module Bracket Nuts | 89 (10) | |||
| Throttle Body Clamp | 62 (7) | |||
| Throttle Body-To-Intake Manifold Bolts | 89 (10) | |||
| Upper Engine Wire Harness Retainer Nut | 44 (5) | |||
|
||||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.