Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 400 (ENGINE CONTROLS - REMOVAL & INSTALLATION)PROGRAMMINGIDLE RELEARN PROCEDUREPROCEDURES
2004 Oldsmobile Bravada AWD
Idle Relearn Procedure: Procedures
2004 Oldsmobile Bravada AWDSECTION Procedures
WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
- Ensure that the following conditions are met:
- Vehicle speed is zero MPH.
- Accelerator pedal angle is less than 14.9 percent.
- Battery voltage is greater than 10 volts.
- Engine Coolant Temperature (ECT) is 41-212°F (5-100°C).
- Intake Air Temperature (IAT) is greater than 41°F (5°C).
- Turn ignition off for 30 seconds.
- Turn ignition on, with engine off for 60 seconds.
- Turn ignition off.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.