Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Monitored Emission Control Systems
The OBD II System monitors all emission control systems that are on-board. Not all vehicles have a full complement of emission control systems. For example, a vehicle may not be equipped with Secondary Air Injection (AIR) or Exhaust Gas Recirculation (EGR). The OBD II regulations require monitoring of the following:
- Air conditioning system.
- Catalytic converter efficiency.
- Comprehensive component monitoring. Emission related inputs and outputs.
- Evaporative Emissions (EVAP) system.
- Exhaust Gas Recirculation (EGR) system.
- Fuel delivery system.
- Heated catalyst monitoring.
- Misfire monitoring.
- Oxygen Sensor or Heated Oxygen Sensor (O2S or HO2S) system.
- Oxygen Sensor Heater (HO2S Heater) system.
- Secondary Air Injection (AIR) system.
For the specific DTCs required for each system, refer to INSPECTION/MAINTENANCE SYSTEM DTCS . Systems such as fuel delivery, misfire, and comprehensive components may not be listed in a system status list. These tests run continuously on some vehicles and may not require an indicator.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.