Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 390 (ENGINE CONTROLS - REMOVAL & INSTALLATION)TORQUE SPECIFICATIONS
2004 Oldsmobile Bravada AWD
Torque Specifications
2004 Oldsmobile Bravada AWDSECTION Torque Specifications
WARNING: This page is about a different car, the 2003 Cadillac Seville and 2003 Cadillac DeVille. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS IN INCH LBS
| Application | Inch. Lbs. (N.m) | |
|---|---|---|
| Accelerator Control Cable Bracket Bolt | 106 (12.0) | |
| Air Filter Element/PCM Housing Cover Screws | 35 (4.0) | |
| AIR Outlet Pipe-To-Exhaust Manifold | 80 (9.0) | |
| AIR Pump-To-Cradle Bolt | 80 (9.0) | |
| AIR Shut-Off Valve Bolt/Nut | 80 (9.0) | |
| AIR Vacuum Control Valve Nut | 80 (9.0) | |
| Camshaft Position Sensor | 89 (10.0) | |
| Closeout/Insulator Panel Fasteners | 18 (2.0) | |
| Crankshaft Position Sensor Bolt | 89 (10.0) | |
| EGR Heat Shield Nuts | 80 (9.0) | |
| EVAP Canister Bracket Nut | 53 (6.0) | |
| EVAP Canister Purge Solenoid Bolt | 106 (12.0) | |
| EVAP Canister Vent Valve Bolt | 53 (6.0) | |
| Fuel Filler Hose/Pipe Hose Clamp | 37 (4.2) | |
| Fuel Injector Sight Shield Nuts | 27 (3.0) | |
| Fuel Rail Studs | 89 (10.0) | |
| Fuel Rail Bracket Retaining Nut | 89 (10.0) | |
| Fuel Sender Access Panel Bolt | 18 (2.0) | |
| Fuel Tank Filler Pipe Ground Wire Attaching Bolt | 80 (9.0) | |
| Idle Air Control Valve | 27 (3.0) | |
| ICM Screws | 7 (0.8) | |
| Ignition Cassette Bolt | 80 (9.0) | |
| Intake Air Duct Clamp | 27 (3.0) | |
| Intake Bolts Manifold | 89 (10.0) | |
| Oil Level Indicator Tube Nut | 89 (10.0) | |
| PCM Connector Screw | 71 (8.0) | |
| Plenum Duct Clamp | 20 (2.25) | |
| Throttle Body Bolt | 106 (12.0) | |
| Throttle Position Sensor Screws | 20 (2.3) | |
| Water Pump Belt Cover Bolt/Nut | 89 (10.0) | |
| Water Pump Belt Tensioner Bolts | 89 (10.0) | |
TORQUE SPECIFICATIONS IN FT. LBS.
| Application | Ft. Lbs. (N.m) | |
|---|---|---|
| EGR Inlet Pipe Bolt | 18 (24) | |
| EGR Valve Bolt/Nut | 18 (24) | |
| EGR Valve Pipe Nut | 44 (60) | |
| Engine Coolant Temperature Sensor | 15 (20) | |
| Engine Oil Cooler Pipe Fittings | 13 (18) | |
| Frame Bolts | 74 (100) | |
| Fuel Filter Outlet Fitting | 22 (30) | |
| Fuel Tank Strap Bolts | 34 (46) | |
| Heated Oxygen Sensor | 30 (41) | |
| Knock Sensor | 18 (24) | |
| Oil Filter Adapter Bolt | 12 (16) | |
| Rear Lift Bracket Bolt | 18 (24) | |
| Spark Plug | 13-17 (18-23) | |
| Surge Tank Inlet Fitting | 35 (47) | |
| Water Crossover Assembly Bolt | 18 (25) | |
| Wheel Lug Nuts | 100 (140) | |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.