Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 385 (ENGINE CONTROLS - REMOVAL & INSTALLATION)TORQUE SPECIFICATIONS
2004 Oldsmobile Bravada AWD
Torque Specifications
2004 Oldsmobile Bravada AWDSECTION Torque Specifications
WARNING: This page is about a different car, the 2003 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |
|---|---|---|
| EGR Pipe Nut | 44 (60) | |
| EGR Valve Nut/Bolt | 18 (24) | |
| Engine Coolant Temperature Sensor | 15 (20) | |
| Engine Oil Pressure Sensor | 12 (16) | |
| Fuel Filter Fitting | 22 (30) | |
| Fuel Tank Strap Bolt | 31 (42) | |
| Knock Sensor | 18 (25) | |
| Oil Filter Adapter Bolt | 12 (16) | |
| Oxygen Sensor | 30 (41) | |
| Rear Frame Bolts | 74 (100) | |
| Spark Plug | 13-16 (17-23) | |
| Water Pump Housing Bolt | 18 (24) | |
| INCH Lbs. (N.m) | ||
| Accelerator Bracket Bolt | 106 (12.0) | |
| Air Cleaner to Intake Duct Hose Clamps | 27 (3.0) | |
| Air Cleaner To MAF/IAT Sensor Clamp | 27 (3.0) | |
| Air Filter/PCM Housing Cover Screws | 35 (4.0) | |
| AIR Pump Bolts | 80 (9.0) | |
| AIR Shut Off Valve Nut | 80 (9.0) | |
| Camshaft Position Sensor Bolt | 89 (10.0) | |
| Crankshaft Position Sensor Bolt | 89 (10.0) | |
| EVAP Canister Nut | 53 (6.0) | |
| EVAP Canister Purge Solenoid Bolt | 106 (12.0) | |
| EVAP Canister Vent Solenoid Bolt | 53 (6.0) | |
| Fuel Filler Hose-To-Filler Pipe Hose Clamp | 31 (3.5) | |
| Idle Air Control Valve Screw | 27 (3.0) | |
| Injector Sight Shield Nut | 27 (3.0) | |
| Ignition Cassette Bolt | 80 (9.0) | |
| Ignition Control Module Screw | 7 (0.8) | |
| PCM Connector Screws | 71 (8.0) | |
| Throttle Body Bolts | 106 (12.0) | |
| Throttle Position Sensor Mounting Bolts | 20 (2.3) | |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.