Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 382 (ENGINE CONTROLS - REMOVAL & INSTALLATION)TORQUE SPECIFICATIONS
2004 Oldsmobile Bravada AWD
Torque Specifications
2004 Oldsmobile Bravada AWDSECTION Torque Specifications
WARNING: This page is about a different car, the 2003 GMC Safari and 2003 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | ||||
|---|---|---|---|---|---|
| Battery Cable Bolt | 11 (15) | ||||
| Distributor Hold-Down Bolt | 18 (25) | ||||
| Engine Coolant Temperature Sensor | 15 (20) | ||||
| Engine Cover Bracket Bolts | 18 (25) | ||||
| Fuel Filter Fuel Line Fittings | 20 (27) | ||||
| Fuel Tank Strap Retaining Bolts | 26 (35) | ||||
| Knock Sensor Retaining Bolt | 18 (25) | ||||
| Oxygen Sensor | 31 (42) | ||||
| Spark Plugs | (1) | ||||
| Steering Linkage Shield Mounting Bolts | 24 (33) | ||||
| INCH Lbs. (N.m) | |||||
| Accelerator Control Cable Bracket-To-Throttle Body And Intake Manifold Studs/Nuts | 106 (12.0) | ||||
| Accelerator Control Pedal Mounting Bolts | 44 (5.0) | ||||
| A/C Hose Bracket-To-Intake Manifold Stud Retaining Nut | 44 (5.0) | ||||
| Air Cleaner Outlet Duct Adapter Stud | 71 (8.0) | ||||
| Air Cleaner Outlet Duct Retaining Nut | 18 (2.0) | ||||
| Air Cleaner Outlet Duct-To-MAF Sensor Clamp | 35 (4.0) | ||||
| Camshaft Position Sensor Screws | 19 (2.2) | ||||
| Crankshaft Position Sensor Bolt | 80 (9.0) | ||||
| Distributor Cap Screws | 21(2.4) | ||||
| Distributor Rotor Screws | 17 (1.9) | ||||
| Engine Cover-To-Firewall Screws | 35 (4.0) | ||||
| Engine Wiring Harness Bracket-To-Intake Manifold Stud Retaining Nut (Left Side Of Engine) | 106 (12.0) | ||||
| Engine Wiring Harness Bracket-To-Intake Manifold Stud Retaining Nut (Right Side Of Engine) | 71 (8.0) | ||||
| EVAP Canister Purge Solenoid Mounting Nuts | 106 (12.0) | ||||
| EVAP Canister Vent Solenoid Mounting Bolt | 89 (10.0) | ||||
| Fuel Filler Pocket Screws | 17 (1.9) | ||||
| Fuel Filler Tube Attaching Screw | 102 (11.5) | ||||
| Fuel Filler Tube Hose Clamp | 27 (3.0) | ||||
| Fuel Filter Mounting Clamp Bolt | 97 (11.0) | ||||
| Idle Air Control Valve Screws | 27 (3.0) | ||||
| Ignition Coil Mounting Studs | 97 (11.0) | ||||
| Ignition Control Module Retaining Screws | 31 (3.5) | ||||
| Injector Retainer Lock Nuts | 27 (3.0) | ||||
| PCM Harness Connector Fasteners | 71 (8.0) | ||||
| Throttle Body Unit-To-Intake Manifold Studs | 80 (9.0) | ||||
| Throttle Position Sensor Bolts | 18 (2.0) | ||||
| Transmission Fluid Filler Tube-To-Accelerator Control Cable Bracket Retaining Bolt | 53 (6.0) | ||||
| Upper Intake Manifold Retaining Studs | (2) | ||||
|
|||||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.