Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Engine Cover: Removal
Remove the caps that cover the extension screws. See Figure . Remove the screws from the extension. Remove the nuts at the bottom of the extension. Pull toward the rear of the vehicle in order to remove the extension from the instrument panel. Disconnect the electrical connectors. Remove the instrument panel extension. Remove the floor air outlet duct. Remove bolts and brackets. See Figure . Remove the engine cover to firewall screws. Remove the engine cover.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.